Post by JoelO on Nov 25, 2004 17:49:17 GMT 10
toiga DH 2.1 front tyre - still here, about half tread
shimano square taper BB - 2 tiny knicks in the outside of the square bit from removing crank arm with angle grinder, both less than 1mm deep and in the middle of the side they're on(not both on same side) has one end bolt, i think the others on the floor of mal's somewhere.
non drive side mod crank - doesn't do a whole lot without the other one but if you need a non drive side crank arm it might be of some use, 158mm
5(i think chainring bolts with spacers - no need for them because i don't use chainrings
also if anyone rides other mtb i have a big pile of maxxis DH tubes which i got cheap ( 90 cents) from NZ, i don't race DH much anymore so they're not much use to me and they weigh a tonne, but they hold air good, presta valve.
just found this under my bed, blackspire super pro series chainring, 5 arm, 74 BCD, 24T
shimano M-475 dics caliper, rotor and mounting hardware.
i have absolutely no idea why it wont work and i wanted to run one brake anyway so it's to go.
just post here if you want anything
shimano square taper BB - 2 tiny knicks in the outside of the square bit from removing crank arm with angle grinder, both less than 1mm deep and in the middle of the side they're on(not both on same side) has one end bolt, i think the others on the floor of mal's somewhere.
non drive side mod crank - doesn't do a whole lot without the other one but if you need a non drive side crank arm it might be of some use, 158mm
5(i think chainring bolts with spacers - no need for them because i don't use chainrings
also if anyone rides other mtb i have a big pile of maxxis DH tubes which i got cheap ( 90 cents) from NZ, i don't race DH much anymore so they're not much use to me and they weigh a tonne, but they hold air good, presta valve.
just found this under my bed, blackspire super pro series chainring, 5 arm, 74 BCD, 24T
shimano M-475 dics caliper, rotor and mounting hardware.
i have absolutely no idea why it wont work and i wanted to run one brake anyway so it's to go.
just post here if you want anything
