|
|
Post by JoelO on Oct 16, 2005 10:54:22 GMT 10
does anybody make a trials bash/ spider to fit old stylee xtr cranks or should i just give up on that idea and go middleburns?
|
|
|
|
Post by AlexPV on Oct 16, 2005 11:23:45 GMT 10
yeah, i have definatly seen people with bashring on xtr cranks. What sort of bolt pattern do they have?
|
|
|
|
Post by JoelO on Oct 16, 2005 11:32:09 GMT 10
it comes with 4 bolt 104, 4 bolt 110 and 5 bolt 110
|
|
|
|
Post by AlexPV on Oct 16, 2005 11:50:21 GMT 10
Plazmatic/Threshold bashring We worked with Threshold Design to come up with this beauty. 1/2" thick around outer perimeter! Close but deep gear type notching is particularly good for when you need to fine tune your balance on a rigid object. Fits compact drive cranks (5 bolt). $38 www.trialsn.com RB Design Trial 5 Bashring RB Design Trial 5 Bashring. A great bashring from RB Designs. Same design as the Free5 but smaller, will cover 22T cog. Available in black and Red. Available as 4 or 5 bolt pattern. RB Design Trial 5 Bashring -- WAS $45.00 NOW $38.00 www.biketrialsaustralia.comnot sure if they will fit but there are a couple of options. |
|
|
|
Post by tomac on Oct 16, 2005 16:38:36 GMT 10
there are a lot of bashrings to fit 5 bolt compact but not many for 5 bolt 110. There are a few custom ring/bash things floating around for XTR cranks but are probably not cheap. They make the most beautiful trials crankset ever though.
- Joel
|
|
|
|
Post by AlexPV on Oct 8, 2021 13:08:15 GMT 10
How did you go with these?
|
|
