|
|
Post by alex markwart on Oct 21, 2005 14:40:08 GMT 10
Hey Joel,
Brett sent me my ERD and it's 547mm but using the dtswiss calculator nothing happens. I plug it all in but it doesn't give me an answer. Ideas?
|
|
|
|
Post by alex markwart on Oct 21, 2005 14:43:00 GMT 10
actually it did but how many crossovers/intersections on the left and right?
This is with 2 left and 3 right.
Spoke length
precise
le. 259.70 mm
ri. 264.10 mm
rounded
(incl. Corrections)
le. 259 mm
ri. 264 mm
|
|
|
|
Post by tomac on Oct 21, 2005 14:56:35 GMT 10
that's exactly what I get with spocalc. Sounds right. You may find that the shop won't have odd numbered spokes so 260 would be fine on the left.
You could honestly use either 2x or 3x on the left and it wouldn't matter too much. for 3x left use 267 or 268mm. 3x both sides will stay truer for longer, the stiffness advantages for 0/1/2x over 3x are mostly for skinny butted spokes.
- Joel
|
|
|
|
Post by tomac on Oct 21, 2005 14:57:45 GMT 10
try to get some electrical tape as well. 45mm is a fairly common width. I think I may have enough in black to do your wheel.
- Joel
|
|
|
|
Post by alex markwart on Oct 21, 2005 15:10:18 GMT 10
so do you recommend 3 on both sides?
|
|
|
|
Post by alex markwart on Oct 21, 2005 15:11:23 GMT 10
weight increase will be minimal i suppose
|
|
|
|
Post by tomac on Oct 21, 2005 15:23:57 GMT 10
yeah go three.
- Joel
|
|
