SeanA
Full Member
Posts: 59
|
Post by SeanA on Apr 25, 2007 11:50:55 GMT 10
Hi Guys,
Anyone know if Chris King has made 20" Disc hubs yet... If so where is a good website to check out all the King components... Headsets, Hubs, etc.
Strongly considering getting back into trials..... Probably going to get a new brisa and build up again.
Any help would be awesome. Thanks gentlemen
~Sean
|
|
|
|
Post by cdfeto on Apr 25, 2007 13:45:47 GMT 10
20" hub? do you mean a hub with a 110 mm spacing? (bmx) or 20 mm? (front) best website would probably be their own ... www.chrisking.com/ |
|
|
|
Post by tomac on Apr 25, 2007 18:22:10 GMT 10
and Brisa has been out of business for a few years now. Dual disc mods come from Monty and Koxx now.
- Joel
|
|
SeanA
Full Member
Posts: 59
|
Post by SeanA on Apr 25, 2007 20:57:37 GMT 10
So no-one is stocking any brisa bikes anymore
|
|
|
|
Post by alex markwart on Apr 26, 2007 6:51:00 GMT 10
I'm 95% sure that is the case. I did go on the Chris King website and it didn't say anything about disc hubs for a 20". I think people tend to go with freewheels, in which case there are trials brand disc hubs. I hear good thinks about the white industries freewheel. Should feel a lot better than an ACS.
|
|
|
|
Post by tomac on Apr 28, 2007 7:20:05 GMT 10
King doesn't make a disc hub for 20". However a couple of people have made them by taking the Classic/BMX shell off the BMX hub and replacing it with the ISO disc shell. This requires buying an extra shell for about $99us on top of the hub cost, and getting someone with a king hub service kit to do the job. I'm not sure if the disc mounts line up to ISO or not when put on a BMX hub, but I presume so. I have a hub service kit and can do the work for nothing if anyone wants.
- Joel
|
|
