|
|
Post by tomac on Aug 3, 2007 22:32:08 GMT 10
Cool. I don't know the measurements of that hub and so can't calculate your spoke length. If you take the hub and rim in to a shop and ask for DT competition (2.0/1.8) spokes to suit then you should get what you need. Don't mention that I'm building it if you should go in to Mal Adjusted in Dickson.
- Joel
|
|
|
|
Post by Andrew-W on Aug 15, 2007 18:38:09 GMT 10
I will be getting the spokes sometime this weekend but i measured up the rim to the HS33 rear Magura brake that i have and my new rim is 15mm wider than the old one so i was wondering if anyone was able to tell me how to make the spacing bigger (but still even of course) so that my new wheel will fit. In regards to the other post (Canberra Trials Lives on) ... once i get my bike up and running again i will start reserving weekends for some rides, i will also have to rely on my dad to drive me there but he shouldn't have a problem with going into Civic or out to Stromlo. the weather starting to warm up a bit so time to come out of hibernation and get fit again  cheers Andrew |
|
|
|
Post by Andrew-W on Sept 14, 2007 17:32:05 GMT 10
OMG finally i have my spokes Joel my good man when are you able to build my wheel (if your offer still stands)?
Cheers
Andrew
|
|
|
|
Post by tomac on Sept 15, 2007 21:17:46 GMT 10
whenever you like man, I'm back now. Some night next week would be fine, or thursday/friday. I'd ask you leave it with me for a day or overnight.
- Joel
|
|
