|
|
Post by AlexPV on May 16, 2006 9:48:37 GMT 10
its canadian, french canadian.
|
|
|
|
Post by AlexPV on May 16, 2006 9:48:52 GMT 10
ca va?
|
|
|
|
Post by tomac on May 16, 2006 16:30:34 GMT 10
Don't they have Italian threaded BBs?
- Joel
|
|
|
|
Post by cdfeto on May 16, 2006 18:01:34 GMT 10
hi,
sorry Im a bit confused ... whats sir-velo or cher-velo ? and how much do you reckon you could sell me those cranks for ? and what kinda BB would need for those cranks ?
cheers, chris
|
|
|
|
Post by tomac on May 16, 2006 18:15:25 GMT 10
cervelo is unrelated. PV is being troublesome.
Cranks would be...$20? You would need an english threaded, cottered BB for those cranks. I have a couple of cups I can give you, just bearings and a spindle required after that. Be warned though, these parts are around 30 years obsolete, you'll most likely be best off trashing an old bike for the parts. Revolve or Aussie Junk at the two canberra rubbish dumps are the most likely places to get your BB from.
- Joel
|
|
|
|
Post by AlexPV on May 16, 2006 18:17:56 GMT 10
hi joel
dont know about italian bb, doubt it. but when i asked the question at work sirvelo vs cher velo i almost got my head shot off. I always thought they were italian aswell, the damn canadians are tricking us!
|
|
|
|
Post by cdfeto on May 16, 2006 20:53:19 GMT 10
20 $ sounds good
There's one cup left on the frame, but only one.
So i cant get bearings and a spindle from a bike shop, that would fit on the frame ?
|
|
|
|
Post by AlexPV on May 16, 2006 21:04:22 GMT 10
post some pics
|
|
|
|
Post by cdfeto on May 16, 2006 22:05:41 GMT 10
I'll try to get a camera tomorow
|
|
|
|
Post by AlexPV on May 17, 2006 0:42:08 GMT 10
the forum is all gery and stuff.
|
|
|
|
Post by cdfeto on May 17, 2006 17:42:05 GMT 10
can I get bearings and a spindle from a bike shop, that would fit on the frame ?
|
|
|
|
Post by tomac on May 17, 2006 18:41:03 GMT 10
as long as the frame has a 68mm shell, just tell the shop that. Also that you need a symettrical cottered spindle. They'll laugh at you, and you can tell them they're a disgrace to the greater community of bicycle enthusiasts. Then crush some ghey $7000 carbon bike with your fingers as you walk out.
- Joel
|
|
|
|
Post by cdfeto on May 18, 2006 20:42:33 GMT 10
Hi Joel,
I guess its easier if I get the cranks and cups off you first. You said 20 for the cranks, what about the cups ? Would you need to see the bike/BB, or a you sure its a 68 mm shell ? Let me know if we can meet up somewhere so i can buy those parts off you, this weekend if possible or next week, just give me a time and adress and I'll be there !
Thanks again for all the help, still working on the camera ... hopefully tomorow !
|
|
|
|
Post by tomac on May 19, 2006 0:02:18 GMT 10
I'll inspect the frame and then check out what I have. Not going to promise anything. You could just run a modern BB and cranks if you wanted. I'm just being a grouch.
- Joel
|
|
|
|
Post by cdfeto on May 19, 2006 17:46:09 GMT 10
I just want to go the cheapest/easiest way ...
So since I could get cranks fo 20 bucks off and if the bearings and spindle are cheap (form a bike shop) then i reckon it would be the way to go.
Coz getting new cranks and BB and stuff wont be cheap !
|
|
